ALL PRODUCTS / BODY ARMOUR-PLATE CARRIER / P.P.C.
PORTA-PIASTRA P.P.C.
Select material/color variant
MULTICAM
€359.00
PORTA-PIASTRA
VEGETATO EI
unique
HCS
Technical specifications
Combat plate carrier totally made of Cordura 1000D and external covering with MOLLE system.
The internal part and the shoulder pads, in contact with the body, are made of high tenacity 3D mesh "Airnet", to ensure maximum breathability.
The internal hook and loop interfaces are positioned in such a way as to allow the application-fixing of any ballistic covering accessories such as shoulders, deltoids, neck in front and neck in back.
On the internal part of the front there is a MOLLE SYSTEM for the assembly of any protection of the genitals area and femoral arteries.
The design of the system has been studied to be compatible with the MOBILITY Doctrine, therefore maximum protection of the A-zone and maximum mobility and ergonomics in movements.
On the external front there are various MOLLE systems that allow you to assemble the main and secondary weapon supply pockets at the desired height also based on the combat belt configuration.
There is a practical front pocket with hook/loop strap closure. Configuration for Body Cam, glasses or other utility attachments, in addition to the organization for housing the support backpack, which allows it, to be mounted without the use of shoulder straps.
The back of plate carrier is completely covered with MOLLE to be able to position other ballistic protections or zipper interfaces for positioning support backpacks or assault accessory panels, there is a section of MOLLE with hook/loop strap to position the Patches.
The emergency handle is placed internally on the back side, based on the latest doctrines of movement in an urban environment.
The cummerbound is always MOLLE compatible, with a rear adjustment system near the elastic part, which allows great comfort and freedom of movement, shaped for excellent management of the quick release system and provided with a rigid interface that can be removed in case of insertion of a IIIA ballistic package or side SAPI plates.
The release system (quick release) is relied on 4 buckles (ROC type), 2 buckles in correspondence with the front part and 2 buckles on the cummerbound.
The sizes are made with the front and back of a single size while the size development is entrusted to the cummerbounds to the following sizes : S-M-L-XL.
All the accessories described are not included (pockets, backpacks, belts, patches, Body Cam, glasses, other utility attachments, panels, assault accessories, ballistic protection accessories and ballistic protections).
Combat plate carrier totally made of Cordura 1000D and external covering with MOLLE system.
The internal part and the shoulder pads, in contact with the body, are made of high tenacity 3D mesh "Airnet", to ensure maximum breathability.
The internal hook and loop interfaces are positioned in such a way as to allow the application-fixing of any ballistic covering accessories such as shoulders, deltoids, neck in front and neck in back.
On the internal part of the front there is a MOLLE SYSTEM for the assembly of any protection of the genitals area and femoral arteries.
The design of the system has been studied to be compatible with the MOBILITY Doctrine, therefore maximum protection of the A-zone and maximum mobility and ergonomics in movements.
On the external front there are various MOLLE systems that allow you to assemble the main and secondary weapon supply pockets at the desired height also based on the combat belt configuration.
There is a practical front pocket with hook/loop strap closure. Configuration for Body Cam, glasses or other utility attachments, in addition to the organization for housing the support backpack, which allows it, to be mounted without the use of shoulder straps.
The back of plate carrier is completely covered with MOLLE to be able to position other ballistic protections or zipper interfaces for positioning support backpacks or assault accessory panels, there is a section of MOLLE with hook/loop strap to position the Patches.
The emergency handle is placed internally on the back side, based on the latest doctrines of movement in an urban environment.
The cummerbound is always MOLLE compatible, with a rear adjustment system near the elastic part, which allows great comfort and freedom of movement, shaped for excellent management of the quick release system and provided with a rigid interface that can be removed in case of insertion of a IIIA ballistic package or side SAPI plates.
The release system (quick release) is relied on 4 buckles (ROC type), 2 buckles in correspondence with the front part and 2 buckles on the cummerbound.
The sizes are made with the front and back of a single size while the size development is entrusted to the cummerbounds to the following sizes : S-M-L-XL.
All the accessories described are not included (pockets, backpacks, belts, patches, Body Cam, glasses, other utility attachments, panels, assault accessories, ballistic protection accessories and ballistic protections).
Combat plate carrier totally made of Cordura 1000D and external covering with MOLLE system.
The internal part and the shoulder pads, in contact with the body, are made of high tenacity 3D mesh "Airnet", to ensure maximum breathability.
The internal hook and loop interfaces are positioned in such a way as to allow the application-fixing of any ballistic covering accessories such as shoulders, deltoids, neck in front and neck in back.
On the internal part of the front there is a MOLLE SYSTEM for the assembly of any protection of the genitals area and femoral arteries.
The design of the system has been studied to be compatible with the MOBILITY Doctrine, therefore maximum protection of the A-zone and maximum mobility and ergonomics in movements.
On the external front there are various MOLLE systems that allow you to assemble the main and secondary weapon supply pockets at the desired height also based on the combat belt configuration.
There is a practical front pocket with hook/loop strap closure. Configuration for Body Cam, glasses or other utility attachments, in addition to the organization for housing the support backpack, which allows it, to be mounted without the use of shoulder straps.
The back of plate carrier is completely covered with MOLLE to be able to position other ballistic protections or zipper interfaces for positioning support backpacks or assault accessory panels, there is a section of MOLLE with hook/loop strap to position the Patches.
The emergency handle is placed internally on the back side, based on the latest doctrines of movement in an urban environment.
The cummerbound is always MOLLE compatible, with a rear adjustment system near the elastic part, which allows great comfort and freedom of movement, shaped for excellent management of the quick release system and provided with a rigid interface that can be removed in case of insertion of a IIIA ballistic package or side SAPI plates.
The release system (quick release) is relied on 4 buckles (ROC type), 2 buckles in correspondence with the front part and 2 buckles on the cummerbound.
The sizes are made with the front and back of a single size while the size development is entrusted to the cummerbounds to the following sizes : S-M-L-XL.
All the accessories described are not included (pockets, backpacks, belts, patches, Body Cam, glasses, other utility attachments, panels, assault accessories, ballistic protection accessories and ballistic protections).
Combat plate carrier totally made of Cordura 1000D and external covering with MOLLE system.
The internal part and the shoulder pads, in contact with the body, are made of high tenacity 3D mesh "Airnet", to ensure maximum breathability.
The internal hook and loop interfaces are positioned in such a way as to allow the application-fixing of any ballistic covering accessories such as shoulders, deltoids, neck in front and neck in back.
On the internal part of the front there is a MOLLE SYSTEM for the assembly of any protection of the genitals area and femoral arteries.
The design of the system has been studied to be compatible with the MOBILITY Doctrine, therefore maximum protection of the A-zone and maximum mobility and ergonomics in movements.
On the external front there are various MOLLE systems that allow you to assemble the main and secondary weapon supply pockets at the desired height also based on the combat belt configuration.
There is a practical front pocket with hook/loop strap closure. Configuration for Body Cam, glasses or other utility attachments, in addition to the organization for housing the support backpack, which allows it, to be mounted without the use of shoulder straps.
The back of plate carrier is completely covered with MOLLE to be able to position other ballistic protections or zipper interfaces for positioning support backpacks or assault accessory panels, there is a section of MOLLE with hook/loop strap to position the Patches.
The emergency handle is placed internally on the back side, based on the latest doctrines of movement in an urban environment.
The cummerbound is always MOLLE compatible, with a rear adjustment system near the elastic part, which allows great comfort and freedom of movement, shaped for excellent management of the quick release system and provided with a rigid interface that can be removed in case of insertion of a IIIA ballistic package or side SAPI plates.
The release system (quick release) is relied on 4 buckles (ROC type), 2 buckles in correspondence with the front part and 2 buckles on the cummerbound.
The sizes are made with the front and back of a single size while the size development is entrusted to the cummerbounds to the following sizes : S-M-L-XL.
All the accessories described are not included (pockets, backpacks, belts, patches, Body Cam, glasses, other utility attachments, panels, assault accessories, ballistic protection accessories and ballistic protections).
